Scuba Regulator Hose Protector – Black or Yellow

Protect your scuba regulator hose from excessive bending and abrasion around the hose fitting with this Scuba Regulator Hose Protector.

Designed to slide over the hose fitting and the adjoining section of regulator hose, the flexible protector helps support the hose where repeated bending commonly occurs. It also provides an additional layer of protection around the hose-to-fitting connection during diving, transport and equipment storage.

Available in Black or Yellow, allowing you to match your regulator setup or use colour to make individual hoses or equipment easier to identify.

Key Features

• Helps reduce sharp hose bending near the regulator hose fitting.
• Protects against abrasion around a commonly exposed section of the hose.
• Flexible design allows the protector to follow normal hose movement.
• Suitable for scuba regulator hoses and compatible hose fittings of the appropriate size.
• Two colour options – Black and Yellow.
• Useful for equipment identification when colour coding regulator setups.

Why Use a Regulator Hose Protector?

The area immediately behind a regulator hose fitting can be subjected to repeated bending as the hose moves during diving, equipment setup and storage.

A hose protector provides additional support around this transition area and helps prevent the hose from being sharply folded against the fitting. It can also help protect the hose surface from rubbing against cylinders, BCD hardware and other diving equipment.

Suitable For

• Scuba regulator first-stage hoses
• Second-stage regulator hoses
• Alternate air source hoses
• Pressure gauge hoses where dimensions are compatible
• Recreational diving regulator configurations
• Technical diving regulator configurations
• Colour-coded regulator and hose setups

Colour Options

• Black – clean, traditional regulator equipment appearance.
• Yellow – high-visibility option suitable for identifying alternate or designated equipment.

Installation & Inspection

Install the hose protector over the appropriate hose fitting so that it covers the transition between the fitting and hose. Compatibility will depend on the dimensions of the hose and fitting.

Hose protectors should not replace normal regulator hose inspection. Periodically move or remove the protector as appropriate to inspect the hose and fitting underneath for corrosion, cracking, abrasion, damage or other signs of deterioration.

Available from Simple Dive in Blackburn South, Melbourne for recreational and technical scuba divers looking for practical regulator accessories and replacement diving equipment.